PRD-0046000Z-23 kollmorgen Multi-Drive Servo Controller Module

• Brand
  kollmorgen
• Model
  PRD-0046000Z-23
• Product Name
  Multi-Drive Servo Controller Module
• Place of Origin
  Israel
• HS Code
  8504409090
• Dimensions
  248mm (length) × 136mm (width) × 72mm(height)
• Weight
  1.27kg
• Operating Temperature
  -10℃ ~ +60℃
• Storage Temperature
  -25℃ ~ +85℃
• Power Supply
  24VDC
• Warranty
  12 month
• Product Status
  New and original

Backed by abundant in-stock inventory and nearly 20 years of industry experience, our company stands as a leading player in the industrial control sector.We offer an extensive range of industrial control products covering numerous models. Should you have any other requirements, please feel free to contact us, and we will respond to you promptly.

Our main brand:

1.ABB's module cards, touch screens, controllers, etc., such as PP846 touch screen, IGCT starting with 5SHY, PM starting controller, AI, DO starting input/output module, SP starting Bailey module, etc

2.GE's module card CPUs, such as VMIC starter, IS200, IS215, IS400, IS420 series, etc,

3.Emerson's card components and EPRO probes, Westinghouse 1C series, Honeywell CC series, Schneider 140 series, Envision full series, Bentley 3500 series, Rexroth motors and drives, and Foxboro small modules.

1. Power Input

Single-phase 200–240 VAC, 50/60 Hz rated AC input with a ±15% allowable voltage fluctuation range.

The control auxiliary power can be sourced from the internal DC-link or an external 24 VDC power supply, configurable via solder jumpers.

The rectified DC bus voltage ranges from 280 VDC to 340 VDC.

Independent built-in fuses are deployed for the DC-link circuit, braking resistor circuit and auxiliary power circuit.

The hardware adopts Eurocard integrated three-phase rectifier structure equipped with smoothing capacitors, with dimensions of 199 mm × 100 mm × 12 mm.

2. Command Inputs (Control Signal Inputs)

Digital Command Inputs

Step & Direction pulse input: Supports differential RS422 and single-ended open-collector modes, with a maximum pulse frequency of 500 kHz.

Hardware enable input: 24 VDC active-high digital signal to activate the internal power stage.

Dual-channel travel limit inputs: Positive and negative hardware limit switches, configurable for active-high or active-low 24 VDC logic.

Fault reset input: Digital trigger signal used to clear drive system faults.

Home sensor input: High-speed trigger input for position homing reference capture.

Analog Command Input

Single-channel analog speed/torque command input with -10 V ~ +10 V voltage range and 12-bit resolution; input impedance is 10 kΩ, compatible with analog closed-loop speed control.

Communication Input Interface

RS-485 serial interface: Runs Modbus RTU protocol for motion instruction delivery and parameter configuration.

Reserved SynqNet industrial bus port: Realizes multi-axis synchronous motion command access.

3. Drive Power Output

Adopts 4-quadrant V-MOS full-bridge power topology, matched with 2-phase and 5-phase VRDM hybrid stepper motors.

Per-phase continuous RMS output current is adjustable within 0.5 A ~ 7.0 A.

Programmable microstep resolution, up to 50000 steps per mechanical revolution.

Embedded dynamic braking circuit featuring nonlinear W-type braking characteristic curve.

4. Signal Outputs

Digital Status Outputs

Ready relay output: Rated load 30 VDC/42 VAC, 1 A; contacts close when the drive is in normal standby state.

Fault alarm output: Open-collector output, low-level signal triggered by overvoltage, overtemperature and overcurrent faults.

Position complete output: Frequency-divided pulse output with built-in pull-up resistor and open-collector structure.

Speed feedback pulse output: Differential RS422 simulated encoder pulse output for speed feedback collection.

Analog Monitoring Output

Single-channel analog monitoring port outputs 0~10 V proportional signal, reflecting real-time motor speed and actual output current.

5. General I/O Electrical Characteristics

Default I/O logic level is 24 VDC active high.

Configurable hardware digital input debounce filter, adjustable from 0.1 ms to 10 ms.

Each open-collector digital output channel supports a maximum load current of 20 mA.

Electrical isolation is designed between power stage and control I/O sections, with 2000 VAC isolation withstand voltage.

Independent grounding design: DGND for digital signals, AGND for analog signals.

Hardware Structure

Compact Eurocard SMD integrated structure (199×100×12mm), integrated rectifier and filter capacitors, standalone fuses for key circuits.

Power & Drive Performance

4-quadrant V-MOS full-bridge driver for 2/5-phase VRDM stepper motors; adjustable 0.5–7.0A RMS phase current, max 50000 steps/rev microstepping, built-in nonlinear dynamic braking.

Multi-Mode Control System

Supports pulse-direction, ±10V analog closed-loop, Modbus RTU control; reserved SynqNet synchronous interface, dual PI closed-loop regulation with configurable compensation.

Isolated I/O Configuration

24V isolated I/O (2000VAC isolation), 500kHz pulse input, multiple digital inputs/outputs and 0–10V analog real-time monitoring port.

Auxiliary Power Supply

Switchable control power from internal DC-link or external 24VDC; stable ±15V auxiliary power output.

Safety Protection

Short-circuit, overvoltage, overheat and overcurrent protection, hardware travel limit protection, status & fault LED indicators.

Industrial Adaptability

Adjustable input filter, independent digital/analog grounding, anti-interference design, stable working under ±15% AC voltage fluctuation.

Frequently Asked Questions (FAQ)

1.How fast will you reply to my inquiry?

We process all inquiries efficiently and will respond promptly once we receive your message.

2.Do you carry large inventory of industrial control parts?

We maintain massive ready stock of mainstream automation spare parts to shorten lead times.

3.Can you source discontinued or obsolete PLC & DCS modules?

Absolutely.
We specialize in sourcing hard-to-find, obsolete and out-of-production industrial control components.

4.Do you inspect goods before shipment?

Every product undergoes thorough inspection before packing and dispatch.

5.Can you ship orders worldwide?

We provide global shipping with flexible logistics for urgent and regular orders.

6.What payment methods are available?

We accept multiple secure payment options. Please contact our sales team for detailed terms.