DS200DTBCG1AAA GE Digital Contact Input Terminal Board

• Brand
  GE
• Model
  DS200DTBCG1AAA
• Product Name
  Digital Contact Input Terminal Board
• Place of Origin
  United States
• HS Code
  8537101190
• Dimensions
  282mm × 96mm × 36mm
• Weight
  0.41 kg
• Operating Temperature
  -20°C ~ +70°C
• Storage Temperature
  -40°C ~ +85°C
• Power Supply
  24 VDC to 125 VDC
• Warranty
  12 month
• Product Status
  New and original

Backed by abundant in-stock inventory and nearly 20 years of industry experience, our company stands as a leading player in the industrial control sector.We offer an extensive range of industrial control products covering numerous models. Should you have any other requirements, please feel free to contact us, and we will respond to you promptly.

Our main brand:

1.ABB's module cards, touch screens, controllers, etc., such as PP846 touch screen, IGCT starting with 5SHY, PM starting controller, AI, DO starting input/output module, SP starting Bailey module, etc

2.GE's module card CPUs, such as VMIC starter, IS200, IS215, IS400, IS420 series, etc,

3.Emerson's card components and EPRO probes, Westinghouse 1C series, Honeywell CC series, Schneider 140 series, Envision full series, Bentley 3500 series, Rexroth motors and drives, and Foxboro small modules.

Customized for the GE Mark V turbine control system, this module acts as the digital input terminal board covering Channels 47–96.

Power Supply: Powered by 28 VDC backplane, with an operating range of 18–32 VDC and typical operating current of 0.36 A.

Adjustable Input Voltage: Onboard jumpers allow switching between 24 VDC and 125 VDC to match various field discrete signal requirements.

Dry Contact Support: Receives discrete signals from limit switches, temperature and pressure switches, interlock units and trip feedback equipment.

Channel Current Protection: Each signal channel features a 45 mA current limit.

Integrated Surge Protection: Built-in suppression components mitigate transient voltage spikes transmitted through field wiring.

Electrical Isolation: Offers 250 VAC dielectric isolation between field circuits and internal control logic to minimize signal interference.

Inter-board Signal Transmission: Delivers collected input signals to the DS200TCDAH digital I/O board via the 50-pin JRR ribbon cable with 5 VDC inter-board logic level.

Passive Hardware Design: Equipped without microprocessors or output drive channels. All settings are implemented by hardware jumpers and software programming is unavailable.

Centralized Screw Terminals: Simplifies field wiring, circuit checking and fault diagnosis.

Compact rack-mounted design for convenient installation and replacement inside Mark V control cabinets.

DS200DTBBG1ABB serves as a passive digital input termination board applied in the Mark V control system, supporting input channels 47–96.

Field dry contact signals, including limit switches, interlock feedback and trip contacts, connect to the board’s screw terminals. Technicians choose either 24 VDC or 125 VDC field operating voltage via onboard jumpers to comply with on-site signal standards.

Every signal channel is equipped with 45 mA current limiting protection. Integrated surge suppression circuits absorb transient voltage spikes from field wiring and protect internal control circuits. A 250 VAC isolation barrier separates field wiring and rack logic circuits to reduce electromagnetic interference.

Processed discrete signals are converted to standard 5 VDC logic signals, then sent to the DS200TCDAH Digital I/O Board via the 50-pin JRR ribbon cable.

This module merely receives and routes input signals and lacks output drive capacity. No microprocessor is integrated; all configurations are realized through hardware jumpers, and software parameter programming is not available.

DS200TCDAH transmits the collected signal status to the main controller. Operators can view real-time digital input status on Mark V Toolbox to implement turbine interlock, protection and sequential control logic.

Frequently Asked Questions (FAQ)

1.How fast will you reply to my inquiry?

We process all inquiries efficiently and will respond promptly once we receive your message.

2.Do you carry large inventory of industrial control parts?

We maintain massive ready stock of mainstream automation spare parts to shorten lead times.

3.Can you source discontinued or obsolete PLC & DCS modules?

Absolutely.
We specialize in sourcing hard-to-find, obsolete and out-of-production industrial control components.

4.Do you inspect goods before shipment?

Every product undergoes thorough inspection before packing and dispatch.

5.Can you ship orders worldwide?

We provide global shipping with flexible logistics for urgent and regular orders.

6.What payment methods are available?

We accept multiple secure payment options. Please contact our sales team for detailed terms.