5X00301G01 EMERSON DCS Interface Module New and original

• Brand
  EMERSON
• Model
  5X00301G01
• Product Name
  Foundation Fieldbus H1 Interface Module
• Dimensions
  41 mm × 159 mm × 108 mm
• Weight
  0.30 kg
• Place of Origin
  United States
• HS Code
  85371011
• Operating Temperature
  ‑20 °C to +60 °C
• Storage Temperature
  ‑40 °C to +85 °C
• Power Supply
  21.6‑26.4 V DC
• Warranty
  12 month
• Status
  Brand new

Emerson 5X00301G01 (Ovation Foundation Fieldbus H1 Interface Module)

Input Specifications

Backplane Power Input

Nominal 24 VDC operating voltage with ±10% tolerance (21.6–26.4 VDC); typical operating current 0.42 A; maximum power consumption 10 W. Powered exclusively by Ovation system rack backplane, equipped with internal overvoltage, overcurrent and reverse polarity protection.

FF-H1 Fieldbus Signal Input

Standard Foundation Fieldbus H1 physical bus input, fixed communication rate 31.25 kbps. Receives digital measurement data, device status and diagnostic information from up to 32 field FF-H1 smart instruments. Conforms to IEC 61158-2 fieldbus electrical standard with bus operating voltage 9–32 VDC.

Backplane Communication Input

Proprietary Ovation backplane bus digital input. Receives system configuration parameters, control commands and polling instructions from the Ovation main controller. No external analog 4–20 mA, voltage or discrete hard-wired signal inputs.

Output Specifications

FF-H1 Fieldbus Signal Output

Drives FF-H1 fieldbus network to transmit remote setpoints, parameter downloads and control commands to on-site smart field devices. Provides bus power distribution and signal driving capability for fieldbus branch circuits.

Backplane Data Output

High-speed digital backplane bus output. Uploads real-time field measurement values, device operating status, fault alarms and comprehensive diagnostic data to the upper Ovation DCS controller for system processing and display.

Module Diagnostic Indicator Output

Onboard LED status indicators for module RUN status, fieldbus communication fault and system alarm state, providing intuitive local visual diagnosis.

Electrical & Isolation Performance

Supports full galvanic isolation between backplane logic circuit and FF-H1 field side, effectively isolating field interference and improving system anti-interference capability. Supports redundant module hot standby configuration with redundant switching time less than 500 ms. No analog voltage/current output channels and no relay contact switching output for field control loops.

Emerson 5X00301G01 (Ovation Foundation Fieldbus H1 Interface Module) Functions

Protocol Conversion & Gateway Switching

Serves as a dedicated communication gateway for Ovation DCS systems, implementing bidirectional protocol conversion between the Ovation proprietary backplane bus and standard FF-H1 Foundation Fieldbus, enabling seamless data interaction between the controller and fieldbus network.

Fieldbus Device Access Management

Supports a single 31.25 kbps FF-H1 bus segment, allowing connection and management of up to 32 field smart devices such as transmitters, valve positioners and analytical instruments.

Field Data Collection & Upload

Acquires real-time process measurement values, equipment operating status, event records and self-diagnostic data from FF-H1 field devices, and uploads standardized valid data to the Ovation main controller through the rack backplane bus.

Downlink Control Command Distribution

Delivers system set values, control outputs, parameter configuration instructions and program download commands from the Ovation DCS to on-site FF-H1 intelligent actuators to realize remote process control.

Fieldbus Physical Signal Driving

Complies with IEC 61158-2 industry standards, provides stable physical-layer signal driving for FF-H1 bus segments, and supports normal operation of bus-powered field instrument loops.

Redundant Hot Standby Operation

Dual-module hot redundant configuration is supported. It achieves automatic fault switching within 500 ms when the active module fails, ensuring non-interruptible fieldbus communication and improving system operational reliability.

Electrical Isolation & Anti-Interference

Features galvanic isolation between the DCS logic backplane side and the fieldbus field side, effectively isolating ground loop interference, preventing signal crosstalk and enhancing overall system safety and stability.

Intelligent Field Device Monitoring

Realizes automatic identification, address management and online status monitoring of FF bus nodes, and accurately diagnoses device online/offline anomalies and bus communication failures in real time.

Local Visual Diagnosis

Equipped with front-panel LED status indicators to intuitively display module operating state, bus communication faults and abnormal events, facilitating rapid on-site inspection and troubleshooting.

System Fault Alarm & Logging

Collects and sorts module internal faults, bus segment errors and communication exceptions, and uploads alarm information to the Ovation DCS system for real-time prompting and event log archiving.

SE4035S2B1 KJ3221X1-BK1
CE4022
VE3008
1C31194G03
AMS-2140
FloBoss S600+
5X00875G01
SE5109
SE3051C0
A6500-UM