PCIE2000ETH Applicom Communication Interface Card brand new

The Applicom PCIE2000ETH (Molex/Woodhead part no. APP-ETH-PCIE, 1120005026) is an intelligent PCI Express ×1 (rev. 1.0a) industrial network interface card with one 10/100 Mbps RJ45 Ethernet port, an on-board AMD SC520 133 MHz processor and 16 MB SDRAM that offloads protocol polling and frame handling from the host CPU for SCADA/HMI applications.

Whatsapp: +86 18059281365
WeChat: +86 19120578390
Tel: +8619120578390
E-mail: Cathyyou401@gmail.com

Description

Technical Specifications
  • Brand
    Applicom
  • Model
    PCIE2000ETH
  • Product Name
    Industrial PCI‑Express Communication Interface Card
  • Dimensions
    170 mm × 107 mm × 22 mm
  • Weight
    0.28 kg
  • Place of Origin
    United States
  • HS Code
    8538900000
  • Operating Temperature
    ‑20 °C to +70 °C
  • Storage Temperature
    ‑40 °C to +85 °C
  • Power Supply
    3.3 VDC
  • Warranty
    12 month
  • Status
    new brand

Working Principle of Applicom PCIE2000ETH

The Applicom PCIE2000ETH is an intelligent PCI-Express-based industrial Ethernet communication card. It establishes highly reliable data connections between industrial PCs (HMI, SCADA, MES hosts) and on-site PLCs and other automation devices via Ethernet.

Equipped with a dedicated on-board embedded processor, the card locally handles industrial protocol parsing, cyclic data polling, frame encapsulation and decapsulation, error detection and link maintenance. These operations run independently without consuming the host CPU resources, eliminating communication bottlenecks on the host side and ensuring real-time data transmission for industrial applications.

When installed into the PCIe slot of an industrial PC, the card creates a high-speed point-to-point data path with host memory over the PCIe bus. Its RJ45 Ethernet port connects to the factory industrial network. Supported manufacturer-specific industrial Ethernet protocols operate on-board to enable bidirectional data communication with remote PLCs from Siemens, Allen-Bradley, Schneider, GE-Fanuc, Mitsubishi, Omron and other brands.

Configuration items such as device addresses, polling intervals, tag mapping and protocol selection are downloaded to the on-board flash memory using Applicom configuration software. After initialization, the hardware performs autonomous cyclic read-and-write operations on registers of field devices, and stores raw data in a shared-memory region accessible by host-based applications.

Upper-level application software retrieves process data through the OPC-DA server, ActiveX controls, DDE or dedicated APIs. Control commands sent from HMI or SCADA are passed from the host PC to the card over the PCIe bus, packaged into matched industrial protocol frames, and transmitted to field controllers through the Ethernet interface.

An integrated watchdog circuit continuously monitors communication health. In case of network disconnection, packet loss or device offline events, the card generates diagnostic status bits and alarm messages, and reports them to host applications for fault indication and handling.

PCIE2000ETH .jpg

Applicom PCIE2000ETH

Voltage & Current

Power is supplied through the industrial PC PCI-Express ×1 slot, drawing 3.3 VDC and 12 VDC power from the motherboard PCIe bus. Typical power consumption ranges from 3-5 W. No external power supply is required.

Input / Output Interfaces

PCI-Express ×1 host interface: internal bidirectional data channel for communication with the industrial PC motherboard

RJ45 10/100Base-TX Ethernet port: external bidirectional industrial Ethernet signal interface with auto-negotiation function

On-board LED indicators: Link, Tx and Rx status lights for operational diagnostics

Note: This unit is a dedicated communication adapter without analog or discrete field I/O terminals. All field process signals are transmitted via Ethernet from remote PLCs and automation devices.

Supported Software & Programs

Applicom Platforma configuration software: used for hardware setup, protocol selection, tag mapping, diagnostic testing and downloading parameters to onboard flash memory

OPC-DA Server (v1.0a / v2.05 / v3.0): provides standard data access interface for SCADA and HMI applications

Wonderware I/O Server: compatible with FastDDE and SuiteLink for seamless Wonderware HMI integration

Development resources: Win32 DLL library supporting custom application development in Visual Studio C/C++/C#/VB, Delphi, LabVIEW and LabWindows-CVI

Supported operating systems: Windows 7/8/10, Windows Server; partial support for Linux and RTX real-time operating systems

PCIE2000ETH.jpg

 UKB-3-35E
MFT-06
H1111.0204
HC-RFS353K
85UVF1‑1CEX
SH31004P12A2000
PW482‑50 S2
PW484-50 S1
AAR181-S50 S2
AAI143-H50 S1
85UVF1-1QD
CCM10


Related Products

Quick Navigation
Online Message
If you have any questions, you can leave us a message and we will contact you within 24 hours!

Copyright © 2026 MASSIVE INTERNATIONAL COMMERCE PTE. LTD.

  • Home
  • Mess
  • Tel
  • Top
  • Online Message
    Send Mail