DS200TCTGG1AFF GE Simplex Trip Board new brand

• Brand
  GE
• Model
  DS200TCTGG1AFF
• Product Name
  Simplex Trip Board
• Place of Origin
  United States
• HS Code
  8537101190
• Dimensions
  254mm × 212mm × 35mm
• Weight
  1.34 kg
• Operating Temperature
  -20°C ~ +70°C
• Storage Temperature
  -40°C ~ +85°C
• Power Supply
  24VDC
• Warranty
  12 MONTH
• Product Status
  New and original

Backed by abundant in-stock inventory and nearly 20 years of industry experience, our company stands as a leading player in the industrial control sector.We offer an extensive range of industrial control products covering numerous models. Should you have any other requirements, please feel free to contact us, and we will respond to you promptly.

Our main brand:

1.ABB's module cards, touch screens, controllers, etc., such as PP846 touch screen, IGCT starting with 5SHY, PM starting controller, AI, DO starting input/output module, SP starting Bailey module, etc

2.GE's module card CPUs, such as VMIC starter, IS200, IS215, IS400, IS420 series, etc,

3.Emerson's card components and EPRO probes, Westinghouse 1C series, Honeywell CC series, Schneider 140 series, Envision full series, Bentley 3500 series, Rexroth motors and drives, and Foxboro small modules.

Connector-Based Signal Partitioning

Three 50-pin ribbon connectors (JLX, JLY, JLZ) facilitate signal exchange between the board and main control modules.

JLX: Receives core logic trip orders and permissive signals from Mark V main control boards, and sends status feedback signals back to the control rack.

JLY: Transmits field discrete input signals, covering emergency stop instructions, overspeed alarms, flame loss signals and protection interlock contacts.

JLZ: Distributes relay driving outputs, alarm indication signals and secondary interlock signals to neighboring termination boards.

Two 12-pin connectors (JM, JN) are reserved for auxiliary power supply, on-site status indication and test signal access.

Relay Channel Functional Assignment

Equipped with 21 pluggable relays, the board features fixed channel allocation for turbine protection loops:

Primary Trip Relay Group: Implements fuel cutoff logic and delivers main emergency trip outputs for turbines.

Auxiliary Protection Relay Group: Processes auxiliary trip events including excessive vibration, high exhaust temperature and low lube oil pressure faults.

Permissive Interlock Relay Group: Controls startup permission, valve interlock and condition signals for sequence control.

Alarm Indication Relay Group: Activates cabinet local alarms and remote fault notification contacts.

Hardware Jumper Configuration

Onboard jumpers configure channel operation modes, including normally open/normally closed contact logic, energized or de-energized failsafe trip modes, and signal debounce parameters. Based on on-site engineering drawings, jumper configurations allocate each channel to specific protection loops.

System Logical Division Within Mark V Architecture

Operating outside the R/S/T triple modular redundant (TMR) core racks, this simplex trip board performs independent simplex safety trip functions.

Safety Trip Channel: Designed for hardwired emergency shutdown circuits that operate independently of software control.

Monitoring & Status Channel: Transmits relay contact status to the control system for fault diagnostics via Mark V Toolbox.

Local Auxiliary Control Channel: Implements cabinet auxiliary interlock without depending on commands from core controllers.

Signal Flow Allocation Rules

Field discrete signals are imported through JLY, processed by onboard conditioning circuits and assigned to corresponding relay channels.

Trip commands issued by main control boards are received via JLX to trigger specified protection relays.

Relay contact outputs are split into two paths: one is delivered to field actuators through terminal wiring, and the other is fed back via JLZ for system status monitoring.

All channel functions are statically assigned via hardware wiring and jumper configurations; function partitioning cannot be adjusted through software programming.

Independent Simplex Safety Architecture

It runs outside R/S/T TMR triple redundant racks and implements independent hardwired trip logic separated from main control software to avoid turbine malfunctions triggered by controller failures.

Modular Relay Design

Fitted with 21 pluggable relays dedicated to turbine protection loops. Defective relays can be replaced separately without removing the entire board for easier maintenance.

Rich Standard Interfaces

Three 50-pin ribbon connectors (JLX, JLY, JLZ) enable inter-board communication; two 12-pin connectors (JM, JN) serve auxiliary power, status indication and testing. Clear signal layout facilitates wiring troubleshooting.

Adjustable Hardware Configuration

Onboard jumpers set NO/NC contact logic, failsafe trip modes and signal debounce. Functions are configured via hardware rather than software to guarantee stable safety logic.

Dual-Path Output Scheme

Relay signals are split into two paths: one triggers field actuators for protection, while the other sends status feedback to the system for real-time monitoring via Mark V Toolbox.

Strong Noise Immunity

Integrated signal conditioning circuits restrain electromagnetic interference, adapting to rigorous industrial environments in power and petrochemical plants.

Built-in Diagnostic Function

Relay operational status can be uploaded to the Mark V system, helping technicians quickly pinpoint faults and cut downtime.

Native Mark V Compatibility

Designed for the GE Mark V Speedtronic turbine control system, supporting signal communication with most control and termination boards in the cabinet.

Static Hardware Function Assignment

Channel functions are determined by wiring and jumpers instead of software, preventing unintended logic alterations during operation.

Comprehensive Protection Capability

Provides versatile protection including emergency shutdown, overspeed trip, flame failure protection, startup interlock and remote alarm outputs for full turbine safety interlock control.

Frequently Asked Questions (FAQ)

1.How fast will you reply to my inquiry?

We process all inquiries efficiently and will respond promptly once we receive your message.

2.Do you carry large inventory of industrial control parts?

We maintain massive ready stock of mainstream automation spare parts to shorten lead times.

3.Can you source discontinued or obsolete PLC & DCS modules?

Absolutely.
We specialize in sourcing hard-to-find, obsolete and out-of-production industrial control components.

4.Do you inspect goods before shipment?

Every product undergoes thorough inspection before packing and dispatch.

5.Can you ship orders worldwide?

We provide global shipping with flexible logistics for urgent and regular orders.

6.What payment methods are available?

We accept multiple secure payment options. Please contact our sales team for detailed terms.