3500/05-01-02-00-00 Bently Nevada System Rack in stock

• Brand
  Bently Nevada
• Model
  3500/05-01-02-00-00
• Product Name
  System Rack
• Dimensions
  483 mm × 311 mm × 267 mm
• Weight
  12.8 kg
• Place of Origin
  United States
• HS Code
  8538900000
• Operating Temperature
  0 °C to +60 °C
• Storage Temperature
  -40 °C to +85 °C
• Power Supply
  150 W
• Warranty
  1 year
• Status
  new

Product Features of Bently Nevada 3500/05-01-02-00-00 System Rack

Input & Output

AC power input: Accepts power from 3500/15 power supply modules; external AC input range: 85-264 VAC, 47-63 Hz

Internal DC power output: Backplane distributes regulated 24 VDC operating power to all plug-in modules

Internal digital bus I/O: High-speed parallel backplane bus, realizes bidirectional data exchange among monitoring modules, rack interface module and communication modules

External signal interface: Connects to field vibration, speed and displacement sensors via internal or external termination blocks; sensor signals are routed to corresponding monitoring modules through rack wiring

Upper-system data output: Transmits measurement values, alarms and diagnostic data to DCS/SCADA/System 1 via matched communication modules installed inside the rack

Product Features

Standard 19-inch EIA full-size system rack equipped with 14 module slots, compatible with all 3500-series monitoring, communication and relay modules. Power supply and rack-interface modules occupy dedicated slots on the left side.

Multiple installation options including 19-inch rack-mount, panel-mount and bulkhead-mount, satisfying various cabinet and field installation conditions.

Heavy-duty internal backplane bus provides reliable power distribution and high-speed inter-module data transmission for each inserted module.

Supports single-power or dual-redundant 3500/15 power supply configuration. Power supplies and monitoring modules support hot-swap without shutting down the entire rack, reducing maintenance risks for critical rotating machinery protection systems.

High-density mechanical design provides abundant measurement channels within limited cabinet space compared with previous-generation monitoring devices.

Supports TMR (Triple Modular Redundancy) architecture, applicable to high-safety-level protection scenarios for turbines and compressors.

Fully conforms to API-670 machinery-protection system standards and satisfies strict EMC anti-interference specifications for heavy-duty industrial sites.

High mechanical rigidity and anti-vibration construction, adaptable to high-vibration working environments in power, petrochemical and metallurgical industries.

Perfectly cooperates with 3500 configuration software and System 1 condition-monitoring platform. Measurement and alarm data can be uploaded to upper-level DCS or SCADA systems through supporting communication gateway modules.

Built-in backplane diagnostic circuits. The rack-interface module collects hardware health information of every slot module to support remote diagnosis and alarm reporting.

Optional internal and external termination blocks are available for field-sensor wiring, simplifying on-site signal wiring layout.

Advantages of Bently Nevada 3500/05-01-02-00-00 System Rack

Featuring a 14-slot 19-inch standard chassis, this rack is fully compatible with all 3500-series monitoring, communication and relay modules. Flexible slot configuration supports scalable channel requirements for rotating-machinery protection systems.

Accepts single or dual-redundant 3500/15 power supply units. Both power modules and monitoring cards support hot-swap operation without rack power-off, effectively reducing maintenance-related downtime and operational hazards for critical production assets.

A heavy-duty internal backplane bus delivers steady power distribution and high-speed inter-module data exchange, establishing a dependable transmission base for vibration, displacement and rotational-speed measurement signals.

Supports TMR (Triple Modular Redundancy) system architecture. It complies with API-670 machinery-protection standards and fits high-safety-grade scenarios for steam turbines, compressors and other key rotating equipment.

Offers diverse installation alternatives including 19-inch rack-mount, panel-mount and bulkhead-mount modes, adapting to different cabinet layouts and field-site installation constraints.

Built with high mechanical stiffness and anti-vibration construction together with excellent EMC noise immunity, enabling reliable continuous operation under severe working conditions in power, petrochemical and metallurgical plants.

Equipped with integrated backplane diagnostic capability. The rack-interface module gathers hardware health data from every installed module to enable remote fault identification and alarm notification.

Provides optional internal and external termination blocks for field sensor connections. This optimizes field-side signal wiring and simplifies cable routing and routine inspection work.

Achieves seamless integration with 3500 configuration software and the System 1 condition-monitoring platform. Process measurements and alarm events can be transmitted to upper-level DCS or SCADA systems via supporting communication gateway modules.

Adopts high-channel-density mechanical layout, accommodating abundant monitoring points within restricted cabinet space and lowering overall cabinet deployment costs.

3500/22-01-01-01
3500/22 288055-01
1900/65A
24765-02-01
3500/91-01-01-01
3500/44-02-01
TK-3E
177313-02-01
1900/65A-01-01-04-CN-00
2300/20-CN